3-13. Which of the following is the best description of the fuction of the secondary  ECC? 1. Provides  the  primary dispatching  of  investigator teams  to  electronic  spaces 2. Provides an alternate to ECC to maintain  casualty  control  if primary ECC is out of control due to battle damage 3. Provides  monitoring  and  control of  damage  control  casualties for ECC 3–14. The  secondary  ECC  must  closely monitor  and  record  all  status passed  over  the  electronics casualty  control  communication circuits  and  the  ship’s  announcing system MCs 0NLY after it has taken control from ECC. 1. True 2. False 3–15. Which  of  the  following  actions should be taken after a battle hit if one or more stations do not answer  during  a  phone  check? 1. FCC  should  dispatch  the investigator  team(s)  as necessary  to  investigate imminent  casualties  and  should handle  the  casualties  that  do exist,    or  request  assistance  as necessary 2. ECC should maintain the electronics  casualty  control with  the  stations  they  know they have and not take risks of losing  any  other  personnel 3. ECC  should  always  contact damage  control  central  in  this situation;  DCC  is  responsible for  dispatching  investigators to  possible  casualty  areas 4. ECC  shauld  dispatch  one  person to each of the stations suspected to be a possible casualty to perform an investigation  and  handle  any casualties    that  may  exist. 3-16. The purpose of the casualty control manual is to serve as a ready and rapid  reference  for  technical details  of  the  Ship’s  electronics system  installation  and  spaces  and to provide data on available repair support material. 1. True 2. False 3–17. All electronic spaces must have a complete (master) ECC Manual. l. True 2. False 3–18. Which  of  the  following  information must be contained in the ECC manual? 1. 2. 3. 4. 3-19.   To Fire–fighting   equipment locations,  emergency destruction   equipment locations, electronics emergency  access  routes,  power distribution  diagrams,  and equipment  air  system  diagrams Equipment  cooling  system diagrams, signal  distribution diagrams,  internal communications,   ventilation controller  locations,  and first–aid  equipment  locations Escape routes (on large ships), technical  manual  locations  and indexes,  gyro  signal distribution  diagrams,  and antenna  details All of the above effectively  train  your electronics  personnel  for  efficient electronics  casualty  control,  which of  the  following  techniques  should you use? 1. Train them on only a few of the simulated  casualties  so  they can feel a sense of accomplishment 2. Train  them  on  several  different simulated  casualties  each  time 3. Promote as much involvement as possible 4. Both 2 and 3 above 19