1. BILLS FOR BOTH PEACE AND WAR
a. Inspect the following, among others, for completeness, correctness, and adequacy.
(1)
Department Organization
(2)
Watch, Quarter, and Station Bills
(3)
Engineering Casualty Bill
(4)
Fueling Bill
2. ADMINISTRATION AND EFFECTIVENESS OF TRAINING
a. Administration and effectiveness of training of personnel for current and prospective duties.
(1) Are sufficient nonrated personnel in training to replace anticipated losses?
(2) NAVEDTRA training courses.
(a) Number of personnel enrolled
(b) Percentage of personnel in department enrolled
(c) Number of personnel whose courses are completed
(3) Are personnel concerned familiar with operating instructions and safety precautions? (Question
personnel at random.)
(4) Are personnel concerned properly instructed and trained to handle casualties to machinery?
(5) Are personnel properly instructed and trained in damage control?
(6) Are training films available and used to the maximum extent?
(7) Are training records of personnel adequate and properly maintained?
3. DISSEMINATION OF INFORMATION WITHIN DEPARTMENT
a. Is necessary information disseminated within the department and divisions?
b. Are the means of familiarizing new personnel with department routine orders and regulations
considered satisfactory?
4. ASSIGNMENT OF PERSONNEL TO STATIONS AND WATCHES
a.
Are personnel properly assigned to battle stations and watches?
b.
Are sufficient personnel aboard at all times to get the ship under way?
c.
Are personnel examined and qualified for important watches?
d.
Does it appear that personnel on watch have been properly instructed? (Question personnel at
random.)
5. OPERATING INSTRUTIONS, SAFETY PRECAUTIONS, PMS, AND CHECKOFF LISTS
a. Inspect completeness of the following:
(1) Operating instructions posted near machinery
(2) Posting of necessary safety precautions
b.
Are PMS schedules properly posted and maintained in the working spaces?
c.
Is the Master PMS Schedule posted and up to date?
d.
Are responsible personnel familiar with Current instructions regarding routine testing and inspections?
e.
Are starting-up and securing sheets properly used?
Figure 13-18.--Engineering inspection checkoff sheet.
13-25
