Check your command’s communications configuration
for identification of this equipment. Specific information
on this equipment is available on a need-to-know basis.
Electrical Equipment Rack CY-7597/
WSC-3, CY-7597A/WSC-3
The CY-7597/WSC-3 (fig. 3-40) and CY-7597A/
WSC-3 provide for mounting of one C-9597/WSC-1(V)
antenna control, one C-10232/WSC-3, and up to four
RT-1107/WSC-3s. These racks contain all the wiring
required to interconnect these items. Connectors
installed on the top panel provide system interface
connections for baseband, teletype, frequency standard,
external modem, and control-indicator equipment.
The C-9597/WSC-1(V) antenna controller provides
a means of controlling the antennas in the OE-82 dual-
Figure 3-40.—Electrical Equipment Rack CY-7597/WSC-3.
shipboard system. The control indicator 3-34 can switch
the AN/WSC-3s for LOS or SATCOM use, monitor rf
output power, and provide power on/off switching.
Electrical Equipment Cabinet
CY-7971/WSC
The CY-7971/WSC (fig. 3-41), provides for
mounting one MX-10342/WSC, two SB-4124/WSCs,
and two TD-1271B/U multiplexer. The cabinet contains
all wiring required to interconnect these pieces of
equipment. Connectors installed on the top panel provide
system interface connections for baseband, teletype,
frequency standard, AN/WSC-3, and control-indicator
equipment.
The MX-10342/WSC provides a means to monitor
and test all functions. The SB-4124/WSCs are data-
Figure 3-41.—Electrical Equipment Cabinet CY-7971/WSC.
3-34
