ASSIGNMENT 5
Textbook Assignment: "Test Equipment," pages 7-2 through 7-11; and "Maintenance/COSAL,"
chapter 8, pages 8-3 through 8-5, and 8-7 through 8-8. You will
also need to refer to Life Cycle Management of Portable Test
Equipment, Measuring and Diagnostic Equipment (TMDE) and Ships'
Maintenance and Material Management (3-M) Manual (chapter 7
references), and Procedures for Conducting a Shipboard
Electromagnetic Interference (EMI) Survey (Surface Ships) (chapter
8 references).
QUESTIONS 5–1 THROUGH 5-26 PERTAIN TO
CHAPTER 7.
5–1.
Any device that is functionally
separate from, but permanently
connected to, the prime equipment
or system, and is used for the
express purpose of testing that
prime equipment or system is known
as what type of test equipment?
1.
Automatic test equipment
2.
Mechanical test instrument
3.
Test, measuring and diagnostic
equipment
4.
Built–in test equipment
5-2.
Equipment designed to test an
equipment or system for perfor-
mance degradation and to perform
fault isolation of unit
malfunctions with a minimum of
human intervention is known as what
type of equipment?
1.
Automatic test equipment
2.
Mechnical test instrument
3.
Test, measuring and diagnostic
equipment
4.
Built–in test equipment
5–3.
Any device that is used to measure,
calibrate, gauge, test, inspect,
diagnose, or otherwise examine
materials, supplies, and equipment
to determine compliance with
requirements established in
technical documents is known as
what type of test equipment?
1.
Automatic test equipment
2.
Mechnical test instrument
3.
Test, measuring and diagnostic
equipment
4.
Built–in test equipment
5-4.
Which of the following documents
identifies the latest known
requirements for test equipment for
your ship?
l.
SCLSIS
2.
SPETERL
3.
PEETE
4.
MEASURE Format 310
5–5.
At which of the following intervals
will a ship normally receive its
updated SPETERL?
1.
Annually
2.
At the start of an overhaul
3.
Before an availability where
major electronic change–outs
will occur
4.
Both 2 and 3 above
29
