13-19.
13-20.
13-21.
In a serial interface that uses software
handshaking, what minimum number of pins
must be connected?
1. Five
2. Two
3. Three
4. Four
The Centronics parallel interface uses what
(a) connector at the computer end of the
cable and what (b) connector at the printer
end of the cable?
1. (a) 36-pin Centronics
(b) 36-pin Centronics
2. (a) 36-pin Centronics
(b) DB-25 subminiature
3. (a) DB-25 subminiature
(b) DB-25 subminiature
4. (a) DB-25 subminiature
(b) 36-pin Centronics
The Centronics parallel interface is which of
the following types of interface between the
computer and the printer?
1. 8-bit, one-way
2. 8-bit, two-way
3. 16-bit, one-way
4. 16-bit, two-way
13-22. Which of the following is NOT a function of
the control panel on a printer?
1. Activating the print head
2. Providing operator selectable fonts
3. Initiating the self-test function
4. Controlling whether the printer is online
or offline
13-23.
13-24.
13-25.
13-26.
13-27.
Continuous paper with perforated holes on
each side is designed to be used with which
of the following paper-feed methods?
1. Friction feed
2. Tractor feed
3. Sheet feeder
4. Pressure feed
The paper-feed motor in a tractor-feed printer
is usually which of the following types of
motors?
1. Stepper
2. Synchro
3. Servo
4. Reduction
Which of the following paper-feed methods
uses one or more pressure rollers to move
paper through the printer?
1. Tractor feed
2. Friction feed
3. Sheet feeder
4. Both 2 and 3 above
Which of the follow lists includes only
impact printers?
1. Chain, band, and laser
2. Drum, dot matrix, and inkjet
3. Inkjet, laser, and daisy wheel
4. Chain, band, drum, dot matrix, and daisy
wheel
The maximum number of characters that a
drum printer can print on one line is
determined by which of the following
factors?
1. The type of software being used
2. The number of rows on the drum
3. The number of columns on the drum
4. The type of computer being used
109
