3–21.
You would need written permission
from the Skipper to work on which
of the following units without
formal training?
1.
MX-8758/UPX
2.
AN/UPX–23
3.
KIT–1A/TSEC
4.
TS-1843A/APX
3–22.
Which of the following agencies
is/are involved in agreements made
under the AIMS program?
1.
The Air Force
2.
The Navy
3.
The FAA
4.
All of the above
3–23.
Which type of DAIR system is used
at major shore installations?
1.
Type 5
2.
Type 8
3.
Type 10
4.
Type 12
3–24.
Which type of DAIR is used at
expeditory airfields?
1.
Type 5
2.
Type 8
3.
Type 10
4.
Type 12
3–25.
You are at a shore installation
and your DAIR system alarms when
the target strays ±300 feet from
the controller–assigned altitude.
What type of DAIR system do you
have?
1.
Type 5
2.
Type 8
3.
Type 10
4.
Type 12
3–26.
A controller using a CATCC DAIR
system has which of the following
information available at his/her
console?
1.
Flight identity
2.
Flight altitude
3.
Ship’s barometric pressure
4.
All of the above
3–27.
As an aircraft leaves the CATCC
controller’s area of respon–
sibility, it is passed to which of
the following controllers?
1.
Another CATCC control position
2.
CIC
3.
ACLS/PALS
4.
Any of the above, as
appropriate
3–28.
Which type of DAIR system would be
used for amphibious operations?
1.
Type 5
2.
Type 8
3.
Type 10
4.
Type 12
3–29.
Each DAIR system provides
information to allow control of
aircraft within a given area.
Which type has a responsibility
area of 50 nautical miles
surrounding the ship?
1.
Type 5
2.
Type 8
3.
Type 10
4.
Type 12
3–30.
Which type of DAIR system has the
AOA as its responsibility area?
1.
Type 5
2.
Type 8
3.
Type 10
4.
Type 12
3–31.
On board your carrier you have
just updated your AN/TPX–42A(V)8
to a (V)12.
Which additional
system can now interface with your
DAIR?
1.
ITAWDS
2.
NTDS
3.
IFF
4.
PALS
3–32.
A technician trained to maintain a
RATCF DAIR system will have what
NEC?
1.
ET–1572
2.
ET-1574
3.
ET–1576
4.
ET-1578
14
