CHAPTER 7 NEW TECHNOLOGY IN DATA COMMUNICATIONS

COMMUNICATIONS SWITCHBOARD

Multi-Tone Waveform Link

Electronics Technician Volume 03-Communications Systems
Page Navigation
122

CHAPTER 7 NEW TECHNOLOGY IN DATA COMMUNICATIONS INTRODUCTION The current Link-11 and Link-4A systems are being updated with new equipments. The Data Terminal Set AN/USQ-125 is currently replacing the older Link-11 data terminals. In addition, new communications systems, such as the Command and Control Processor (C2P) and the Joint Tactical Information Distribution System (JTIDS), are quickly becoming commonplace on various platforms in the Navy. This chapter will introduce you to some of the changes taking place and the basic features of some of the new systems. After completing this chapter, you should be able to: . Describe the various components of the AN/USQ-125 Data Terminal Set. . Describe the operation of the AN/USQ-125 in a typical Link-11 system. . State the purpose of the Joint Tactical Information Data System (Link-16). . Describe the components of the Link-16 system. . State the function of the Command and Control Processor (C2P) system. l Describe the components of the C2P system. THE AN/USQ-125 DATA TERMINAL SET The AN/USQ-125 data terminal set is the newest Link-11 data terminal set in the Navy. It is quickly replacing older DTSs, such as the AN/USQ-36 and the AN/USQ-59. There are several configurations of the AN/USQ- 125. The CP-2205(P)(V)/USQ-125 data terminal with the MX-512P/RC Remote Control Unit c o n f i g u r a t i o n . T h e o t h e r c o n f i g u r a t i o n i s CP-2205(P)(V)2/USQ-125 data terminal with a personal computer (386 or better) running the MXPCR software. The personal computer serves the Figure 7-1.—The AN/USQ-125 data terminal set standard same function as the remote control indicator in this interface block diagram. configuration. The standard interface configuration of the AN/USQ-125 is shown in figure 7-1. In this chapter, we examine the data terminal and the THE CP-2205(P)(V)/USQ-125 DATA TERMINAL functions of the control indicators, either the MX-512P/RC or a personal computer. The CP-2205(P)(V)/USQ-125 data terminal is a compact, state-of-the-art data terminal that is mounted in a standard 19-inch equipment rack. The data 7-1

Privacy Statement
Press Release
Contact